McDATA OPENconnectors Command Line Interace Instrukcja Użytkownika Pobierz pdf (Strona 72)

2-28

Enterprise Operating System Command Line Interface User Manual

config

Command Example Root> config port show 4

Output This command displays as a table that includes the following

properties.

Output Example The output from the config.port.show command displays as follows.

Port Number: 4

Name: Sam’s tape drive

Blocked: false

Type: F Port

Speed: 2 Gb/sec

Rx BB Credits: 12

config.port.showPortAddr

Syntax showPortAddr

Purpose This command displays the port address configuration for all ports.

NOTE: The command show.port.showPortAddr on page 2-173 has functionality

that is the same as this command.

Port Number The port number.

Name The configured port name.

Blocked The blocked state. Valid values are true and false.

FAN The fabric address notification (FAN) state. Valid

values are true and false. (Sphereon 4300 and

Sphereon 4500 switches only.)

Type The port type. Valid values are:

•F Port

•E Port

•G Port

• Fx Port (Sphereon 4300 and Sphereon 4500 only)

• Gx Port (Sphereon 4300 and Sphereon 4500 only)

Speed The port speed. Valid values are 1 Gb/sec, 2 Gb/sec,

and Negotiate.

Rx BB Credits The number of configured Rx BB Credits.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 327 328

Brak uwag

McDATA OPENconnectors Command Line Interace Instrukcja Użytkownika Strona 72