McDATA OPENconnectors Command Line Interace Instrukcja Użytkownika Pobierz pdf (Strona 180)

2-136

Enterprise Operating System Command Line Interface User Manual

perf

Parameters This command has no parameters.

Command Example

Root> perf thresholdAlerts throughput showUtilTypeTable

Output Example The output from the

perf.thresholdAlerts.throughput.showUtilTypeTable command

displays as follows.

Number Utilization Type

------ ----------------------

1 Transmit Traffic (Tx)

2 Receive Traffic (Rx)

3 Both (Tx/Rx)

perf.traffic

Syntax traffic portNumber

Purpose This command displays port traffic counters for a specified port.

Parameters This command has one parameter.

Command Example

Root> perf traffic 2

Output The port traffic counter data is displayed as a table that includes the

following statistics, along with a wrap count for each corresponding

counter.

portNumber Specifies the port number. Valid values are:

0–11 for the Sphereon 4300

0–15 for the Sphereon 3016 and 3216

0–23 for the Sphereon 4500

0–31 for the Sphereon 3032 and 3232

0–63 for the Intrepid 6064

0–127 and 132–143 for the Intrepid 6140

Port The port number.

Rx% The received link utilization percentage.

Tx% The transmitted link utilization percentage.

RxFrames The number of Fibre Channel Class 2 and Class

3 frames that the port has received.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 327 328

Brak uwag

McDATA OPENconnectors Command Line Interace Instrukcja Użytkownika Strona 180